Huge Savings Item! Save 18% on the Jet-Lube SS-30 Anti-Seize Thread Lubricant and Conductive Termination Compound, 1/4 lbs Brush Top Can by Jet-Lube at Motor Clean USA. MPN: 12555. Hurry! Limited time offer. Offer valid only while supplies last. Works as a similar and dissimilar metal between two metal surfaces to prevent seizing. This compound formula will not melt in high temperatures and improves conductivity and ground continuity. Designed for specially formulated to prevent excessive over torque and has a very high static friction factor of 0.13, the unique blend of complex thickeners to help evenly distribute the copper flake unto the metal surfaces to eliminate metal to threaded metal contact. Recommended lubrication: stud thread
Product Description & Reviews
Works as a similar and dissimilar metal between two metal surfaces to prevent seizing. This compound formula will not melt in high temperatures and improves conductivity and ground continuity. Designed for specially formulated to prevent excessive over torque and has a very high static friction factor of 0.13, the unique blend of complex thickeners to help evenly distribute the copper flake unto the metal surfaces to eliminate metal to threaded metal contact. Recommended lubrication: stud threads shall be thoroughly lubricated on both ends, fill the threaded area "Root - to - Crest" on the stud/bolt. The nut will push the anti-seize down the threads as it travels. Bearing surfaces between nut and hardened washer or nut and flange should be lubricated with anti-seize in the area where the nut will rest against the flange or washer. Anti-seize on the assembly should be easily visible. Not recommended for: not for use on oxygen lines. Not intended for use with aluminum where galvanic corrosion could be a significant issue. Petroleum based lubricating grease with copper filling. Personal precautions: wear gloves and protective overalls. Environmental precautions: do not allow it to enter drains. Spillage: scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth. Handling: no special handling precautions necessary. Storage: Do not store at elevated temperatures. Respiratory protection: none needed. Hand protection: nitrile gloves for hypersensitive persons. Anti-seize thread lubricant and conductive termination compound is 30 percent high purity/refined copper flake mixed in a high temp non-melt base grease formula that aids in conductivity and is an ideal anti-seize compound for threaded fasteners and cable connections. Appearance: bright copper. K-factor: 0.13. Service rating: -65 degree F to 1800 degree F. Eco-certified. Size: 1/4 lbs brush top can.
Features & Highlights
- Retains the equipment in serviceable condition
- Environmentally preferred anti-seize thread lubricant and conductive termination compound
- Contains high concentration of copper flakes which is required for heavy loads or compression
- Has controlled frictional characteristics so that the surfaces of the nut and bolt are torque to the designed K-factor
- Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact
2 x 2 x 3.2 inches
Have questions about this item (12555), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Jet-Lube, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: 12346241, ean: 0021625629834,
ACDelco Synthetic Multi-Purpose Lubricant provides excellent anti-wear and pressure protection. This product is used for lubricating the actuator rod knob and base assembly for model year 2007 and later GMC Acadia and Saturn Outlook and 2008 model ye...
mpn: 17401, ean: 0690858017406,
Zep 45 Dual Force is a superior penetrant and lubricant that offers excellent resistance without diminishing its penetrant properties. The product quickly penetrates to dramatically reduce friction and wear while offering excellent corrosion resistan...
Heavy-duty, temperature resistant, petroleum-based lubricant compound fortified with graphite and metallic flake. Will not evaporate or harden in extreme cold or heat. Use during assembly to prevent seizing, galling and corrosion. For use in assembli...
mpn: Shell Gadus S2 V220 2 10-PACK, ean: 0687748549574,
SHELL Gadus S2 V220 2 is a highly quality multi-purpose, extreme-pressure grease based on a blend of high viscosity index mineral oil and lithium hydroxystearate soap thickener containing extreme-pressure and other proven additives to enhance perform...