Thread Lock / Sealers - Blowout Sale! Save up to 59%


Blowout Sale! Up to 59% off on Thread Lock (in Sealers) at Motor Clean USA [18]. Top brands include Loctite, Henkel, TIME-SERT, Gasoila, Permatex, Vibra-TITE, & La-Co. Hurry! Limited time offers. Offers valid only while supplies last.



Loctite 492145 545 Pneumatic/Hydraulic Thread Sealant Bottle, 36-Milliliter
By Loctite
In Stock
$26.99
$21.88
You Save: 19%

mpn: 492145, ean: 0079340374829,

4.2 out of 5 stars with 53 reviews
Designed for locking and sealing high-pressure pneumatic and hydraulic systems. The pneumatic/hydraulic sealant contains no fillers or particles that could contaminate system fluids, foul valves or clog fine filters and screens. Reliably cures on ''as received'' fasteners. Controlled locking strength allows easy disassembly. Typical applications include hydraulic line fittings, brake fittings, transmission fluid fittings and PTO fittings.Designed for locking and sealing high-pressure pneumatic a


Loctite 492142 271 Red Heavy Duty Threadlocker Bottle, 36-Milliliter
By Loctite
In Stock
$25.99
$21.21
You Save: 18%

mpn: 492142, ean: 0079340374799,

4.3 out of 5 stars with 35 reviews
Loctite Red Threadlocker 271 is a high strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. Removable with heat and hand tools. For fasteners up to 1'' (25 mm) in size. Typical applications include frame brackets, suspension fasteners, shock absorber mounts, wheel studs.High strength threadlocker f


Loctite 1330906-6PK Medium Strength Surface Insensitive Threadlocker 243, 36-milliliter Tube, (Pack of 6)
By Loctite
In Stock
$101.00

mpn: 1330906-6PK,

4.8 out of 5 stars with 16 reviews
Loctite 243 Medium Strength Surface Insensitive thread locker features a general purpose, medium strength, blue thread locker with a high oil tolerance. It has a higher temperature range than all the other blue thread lockers at 360F. For fasteners between 1⁄4'' to 3⁄4'' (6 mm to 19 mm). Parts can be separated using hand tools. Typical applications include Rocker studs, rocker adjustment bolts, bolts on valve and cam covers, oil pans, disc brake calipers, intakes and alternators, and pulley


Loctite 242 Threadlocker - Blue Liquid 1.69oz Bottle
By Henkel
In Stock
$19.95
$15.44
You Save: 23%

mpn: FBA_23398, ean: 6902545233988,

4.4 out of 5 stars with 32 reviews
The original Liquid capacity is approximately a little less than 1/2 of bottle. Because, a size of bottle is 9 x 5.5 x 2.5(cm).Loctite Number: 242. Viscosity: 1200cps @ 20rpm. Threadlocking Strength: Medium. Set time: 10 minutes. Color: Blue.


Time-Sert 6020 thread locker & sealer 500 DEGREES FAHRENHEIT
By TIME-SERT
In Stock
$21.39

mpn: 6020, ean: 0845617006454,

4.1 out of 5 stars with 38 reviews
TIME-SERT p/n 6020 thread locker and Sealer 500 DEGREES FAHRENHEIT. Used on TIME-SERT thread inserts. Superior thread locker and sealer for threaded inserts. TIME-SERT thread locker p/n 6020. TIME-SERT the thread repair experts.TIME-SERT p/n 6020 thread locker and Sealer 500 DEGREES FAHRENHEIT. Used on TIME-SERT thread inserts Made In USA.. Superior thread locker and sealer for threaded inserts.. TIME-SERT thread locker p/n 6020. TIME-SERT the thread repair experts.


Loctite 88442 Red 272 High Temperature/Strength Thread Locker, 50 mL Bottle
By Loctite
In Stock
$46.87
$21.90
You Save: 53%

mpn: 88442, ean: 0079340272408,

4.4 out of 5 stars with 36 reviews
272 High-Strength/High-Temp Thread locker. Provides a fast cure on most surfaces. Including ''as received'' fasteners. Heat and hand tools are required for disassembly. Color(s): Red; Capacity (Weight): 50 mL; Packing Type: Bottle. Features: Provides a fast cure on most surfaces Including ''as received'' fasteners Heat and hand tools are required for disassembly Specifications: Height: 6'' Length: 1'' Width: 2.5''.Brand: Loctite. Loctite Number: 272. Threadlocking Strength: High. Color: Red.


Loctite 37701 Red High Strength Thread Locker - 9 Grams Stick, (Pack of 5)
By Loctite
In Stock
$53.99

mpn: 37701-5PK, ean: 0811553030679,

4.5 out of 5 stars with 45 reviews
This high strength thread locker is better suited for heavy-duty applications where resistance to heavy shock, vibration and stress levels required. Localized heating and hand tools are required to separate parts. Typical applications include assembly with air tools, cylinder black bolts, ring gear bolts and transmission shaft bolts. Great flexibility for tough applications. Includes 5 - 9 grams sticks.


Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
By Gasoila
In Stock
$21.18
$20.00
You Save: 6%

mpn: SS16, ean: 0686081010161,

4.5 out of 5 stars with 13 reviews
Premium pipe thread sealant with PTFE. Provides a positive seal on pipe thread, joints, fittings, hoses, nozzles, LPG cylinders, pump assemblies, motors, oil burners, hydraulics, compressors, engines, housings, plugs, fuel lines, couplings and more. Excellent resistance to gasoline, up to 20 percent alcohol and petroleum blends, petroleum solvents, kerosene, diesel oil, propane, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more.Non-harde


Permatex 27010-6PK High Strength Threadlocker Red Gel Twist, 10 g (Pack of 6)
By Permatex
In Stock
$84.05
$77.39
You Save: 8%

mpn: 27010-6PK,

4.7 out of 5 stars with 25 reviews
Permatex High Strength Threadlocker Red Gel puts the threadlocker where you want it. The gel formula provides 'liquid-reliability' without drips, globs, mess or waste. This high strength threadlocker for heavy-duty applications is especially well-suited for permanently locking studs and press fits and adds 3,000 PSI holding power on slip and press fit assemblies. It replaces set screws and snap rings and also locks against vibration loosening. May require heat or special tools for removal. Appli


Vibra-TITE VC-3 Threadmate, 30 ml Bottle with Brush Cap Applicator
By Vibra-TITE
In Stock
$42.99
$17.52
You Save: 59%

mpn: 21330, ean: 0745619213303,

4.6 out of 5 stars with 23 reviews
Vibra-TITE VC-3 Original is a powerful locking and sealing coating for threadedfasteners that works on the principle of ''friction through viscosity.'' It utilizes a special blend of acrylic resins to prevent fasteners from loosening - even under extreme vibration. Designed for use on external and internal threads of virtually any material or finish, Vibra-TITE VC-3 Original dries to the touch within seconds of application coated parts are ready for assembly in just a few minutes. Pre-cleaning o


Gasoila DE04 DEF Diesel Exhaust Thread Sealant, 1/4 Pint Brush
By Gasoila
In Stock
$25.99

mpn: DE04, ean: 7262318355323,

4.8 out of 5 stars with 38 reviews
Gasoila 1/4 pint Brush DEF Diesel Exhaust Sealant has excellent resistance to a wide variety of hard to seal chemicals. This single part product can be applied to clean and dry threads and immediately assembled. Gasoila DEF is a soft setting sealant for tough applications. Designed for systems carrying urea-based chemical reactant used in SCR systems.Excellent performance with systems handling diesel exhaust fluid, 100 percent methanol, ethanol, alcohol and ideal for concentrated or dilute acids


Gasoila E-Seal Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
By Gasoila
In Stock
$51.19

mpn: GE16, ean: 0686081010932,

4.9 out of 5 stars with 21 reviews
Premium pipe thread sealant with PTFE. Provides a positive seal on pipe thread, joints, fittings, hoses, nozzles, LPG cylinders, pump assemblies, motors, oil burners, hydraulics, compressors, engines, housings, plugs, fuel lines, couplings and more. Excellent resistance to gasoline, up to 20 percent alcohol and petroleum blends, petroleum solvents, kerosene, diesel oil, propane, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, compressed air and more.Seals and


LA-CO 42014 Slic-Tite Premium Thread Sealant Paste with PTFE, -50 to 500 Degree F Temperature, 1 gallon
By La-Co
In Stock
$130.11

mpn: 42014, ean: 0048615420141,

4.3 out of 5 stars with 25 reviews
Specially formulated with PTFE for added sealing power, Slic-tite is the premium thread sealant paste. It has been successfully used for decades to seal water, air, steam, natural gas, and more. It removes easily from skin and clothing, reducing post-job cleanup time. Slic-tite thread sealant works in extremely high-pressure systems, and it comes with several approvals to ensure industry standards are met.Use on metal, PVC, CPVC and ABS plastic pipe threads. For sealing water, air, steam, natura


Loctite 511535 Red High Strength Threadlocker Stick, 19-Gram
By Loctite
In Stock
$26.99
$19.99
You Save: 26%

mpn: 511535, ean: 0743281441277,

4.8 out of 5 stars with 13 reviews
With the same convenient packaging as the medium strength Loctite Blue Stick Threadlocker, this high strength threadlocker is better suited for heavy-duty applications where resistance to heavy shock, vibration and stress levels required. Localized heating and hand tools are required to sperate parts. Typical applications include assembly with air tools, cylinder black bolts, ring gear bolts and transmission shaft bolts.This high strength threadlocker is better suited for heavy-duty applications


Loctite Threadlocker Tubes (5 Pack, Blue)
By Loctite
In Stock
$34.99

ean: 0785614589058,

4.1 out of 5 stars with 53 reviews
Threadlocker Blue 242 locks threaded metal fasteners against vibration loosening. Metal parts are removable with hand tools for easy disassembly. Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch (6mm to 20mm) nuts and bolts. Sets in 10 minutes; cures in 24 hours. Useful for small motors, mowers, and power equipment.


Permatex Threadlocker Blue Gel 10 Gram
By Permatex
In Stock
$22.79

mpn: 24010, ean: 0686226240101,

4.9 out of 5 stars with 18 reviews
Sold as 2 UNITS at $14.24 per unit. (1 unit = each.) 10 gram. Service removable. Ideal for fasteners 1/4'' to 1''. No drip or mess. Gel twist applicator. Medium strength. Carded . Manufacturer number: 24010. SKU #: 8197188. Country of origin: (TBA). Distributed by Permatex, Inc.10 gram. Service removable. Ideal for fasteners 1/4'' to 1''. No drip or mess. Gel twist applicator.


Loctite 38652-6PK High Temperature Bearing Mount 620 - 36 ml Bottle, (Pack of 6)
By Loctite
In Stock
$134.99

mpn: 38652-6PK,

4.2 out of 5 stars with 10 reviews
A high temperature, high viscosity liquid retaining compound. Provides a shear strength of over 3,800 psi on steel. Locks and secures metal cylindrical assemblies up to 0.015 inch diameter clearance. Seals against leakage. Typical applications include axle bearings, water and power steering pump pulley.A high temperature, high viscosity liquid retaining compound. Provides a shear strength of over 3,800 psi on steel. Locks and secures metal cylindrical assemblies up to 0.015 inch diameter clearan


Loctite 242 Multi-Purpose Medium-Strength Threadlocker Small-Job Pack 1/2ml - 100 Pack
By Loctite
In Stock
$134.99

mpn: 242, ean: 0701748588705,

4.3 out of 5 stars with 10 reviews
Loctite Threadlocker 242 is designed for the locking and sealing of all those threaded screws and fasteners which you need to stay tight! The product has excellent creeping properties, which fully penetrates all the tight thread grooves, and produces a quick hard bond within 10 minutes. It protects threads from rust and corrosion and has excellent shock and vibration protection. Loctite Threadlocker 242 is well suited for applications on most all metal surfaces, including stainless steel and pla


Vibra-TITE 140 Permanent High Strength Anaerobic Threadlocker, 1 liter Jug, Red
By Vibra-TITE
In Stock
$90.39

mpn: 14000, ean: 0745619140005,

4.7 out of 5 stars with 59 reviews
Vibra-TITE 140 High Strength Threadlocker is a red general purpose adhesive for permanent threaded assemblies. 140 locks fasteners up to 1'' in diameter sealing against leakage and corrosion. It resists attack from most fuels, lubricants and most industrial gases. Eliminates double nutting and or welding of critical assemblies. The product’s viscosity can be used on fine to medium threaded parts that will not require periodic disassembly. Ensure parts are clean, dry and free from oil and greas


Permatex 59214-12PK High Temperature Thread Sealant, 6 ml (Pack of 12)
By Permatex
In Stock
$33.55
$33.54

mpn: 59214-12PK,

4.5 out of 5 stars with 41 reviews
Permatex High Temperature Thread Sealant lubricates threads for easy assembly and disassembly and locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels and won’t shred or wear like Teflon tape. Parts may be repositioned up to 4 hours after application. Temperature range from -65 degrees fahrenheit to 400 degrees fahrenheit.Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy



Viewing Page 1 of 4

Browse Our Catalog